Film and Mass Media at the UCF Nicholson School of Communication and Media
Power Tools
Overview
Please treat power tools with respect as they can be very dangerous if they are not handled with care by a trained operator. Always read the safety manual and inspect a power tool for damage before using it.
Qualified Operator
Student crew members must receive training prior to using power tools within a workshop, studio, or stage or else where on campus. This also applies to using school-owned power tools while on location.
Only a faculty or staff member, who themselves are a qualified operator, can instruct students on the safe handling and proper operation of power tools.
A power tool shall only be handled by individuals who have been trained in the safe handling and proper operation of that specific tool. This means individuals trained on the safe handling and proper operation of a circular saw are not automatically qualified to also use a reciprocating saw.
Supervision of Use
The use of power tools must be supervised by a qualified faculty or staff when used by students during the construction of a set or set pieces.
Safe Handling & Care
Mistreatment of a power tool, such as dropping and rough handling, may cause malfunction of the tool. This could lead to personal injury by electrocution or wound caused by the blade or bit.
Best Practices
- Never carry the tool by the power cord or tug on the power cord to turn it off.
- Do not use a power tool in a damp location without using a GFCI as well as wearing gloves and rubber soled shoes.
- Always make sure the tool is properly grounded.
- Check the operation of the switch / trigger before beginning application to make sure it turns off properly.
- Do not use dull or damaged blades.
- Always unplug power tools when not in use.
- When in doubt, ask for help.